WE BELIEVE IN A HEALTHY ENVIRONMENT
Your individual savings standard with highly energy efficient DeltaHouse constructions
We offer various wall systems for your Deltahouse. Decide for yourself which wall meets your requirements and wishes. Once you have selected your desired house type, you can choose from four different wall models in different energy efficiency classes. Your Deltahouse with a thermally insulated floor plate or thermally insulated cellar, combined with appropriate heating and ventilation system, will become an high energy-efficient house.
Deltahouse wall systems
System „NEO-Standart“ 150/150
U = 0.13 W / (m²K), width about 342 mm
Basic plaster finishing
Façade insulation — EPS 150 mm
OSB3 board 12 mm
Timberframe C24 150 mm
Insulation — Mineral wool 150 mm
OSB3 board 12 mm
Vapour membrane approx. 0.5 mm
Gypsum board 12,5 mm
System „STONE-Standart“ 150/150
U = 0.13 W / (m²K), width approx. 342 mm
Basic plaster finishing
Facade insulation — Rockwool 150 mm
OSB3 board 12 mm
Timber frame C24 150 mm
Insulation — Rockwool 150 mm
OSB3 board 12 mm
Vapour membrane approx. 0.5 mm
Gypsum board 12,5 mm
System „ECO-Standart“ 200/100
U = 0.13 W / (m²K), width approx. 332 mm
Basic plaster finishing
Wooden fiber insulation board 100 mm
Timber frame C24 200 mm
Mineral insulation 200 mm
OSB3 board 12 mm
Vapour membrane approx. 0.5 mm
Gypsum board 12,5 mm
System „VENT-Standart“ 200/50
U = 0.15 W / (m²K), width about 340 mm
Wood cladding / Fiber cement panels / Other
Lath 50 mm
Ventilation gap
Water resistance membrane
Timber frame C24 195 mm
Insulation — mineral wool 200 mm
OSB3 board 12 mm
Vapour membrane approx. 0.5 mm
Lath 50 mm + insulation
Gypsum board 12,5 mm
Various constructions up to passive standard
We are flexible to discuss with you any individual constructions. Please do not hesitate and contact us!
Internal walls
Gypsum board 12,5 mm
OSB3 board 12 mm
Timber frame C24 95 mm (bearing 145mm)
Insulation — mineral wool 100 mm (bearing 150mm)
OSB3 board 12 mm
Gypsum board 12,5 mm
Ceilings
OSB3 board 12 mm
Timber beams 195 mm (or 245mm)
Sound Isolation — mineral wool 100 mm
Lath (or temporary fixing net)
Roof panels
Various type of prefabricated roof panels depends from the project
MITEK roof trusses sets
Certified prefabricated MITEK roof trusses sets. A trussed rafter roof is a fully engineered structure delivering a practical and versatile roofing solution. Manufactured offsite in factory controlled conditions, roof trusses offer immense versatility. A wide variety of truss configurations allow for a huge range of different applications, such as room in the roof (Attic) trusses, raised ceiling trusses, and scissor trusses. Trussed rafters can be manufactured in a wide range of timber sections, with larger sections allowing for big spans for a variety of commercial applications .